Basit öğe kaydını göster

dc.contributor.authorÖzkaya, Kamil Yunus
dc.contributor.authorBeyaz, Mustafa İlker
dc.date.accessioned2020-01-06T11:42:33Z
dc.date.available2020-01-06T11:42:33Z
dc.date.issued2015
dc.identifier.citationÖzkaya, K. Y. & Beyaz, M. İ. (2015). An investigation on the electromagnetic design optimization of rotary micromachines with double-layer permanent magnets. Sensors and Actuators A: Physical, 222(1), 335-340.en_US
dc.identifier.issn0924-4247
dc.identifier.urihttp://hdl.handle.net/20.500.12566/239
dc.description.abstractElectromagnetic design optimization of axial-flux rotary micromachines utilizing double-layer permanent magnets is presented and applied to a micro-scale generator/spirometer currently under development. Double-layer magnet configuration enables the use of two stators in a rotary micromachine, and hence offers performance enhancements in such devices. For an efficient transduction, number of magnetic poles should be carefully selected to obtain maximum flux density in a given device geometry, where magnetic reluctance and leakage act as two competing effects. This optimization has been performed through electromagnetic finite element simulations over a range of MEMS geometries. It was shown that the optimum number of magnetic poles varies from 22 to higher than 32 depending on specific magnet dimensions. Experiments on a manufactured magnet were performed and compared with simulation results. The analysis and results reported here shed light on the efficient design of magnetic micromachines in similar scales.en_US
dc.description.sponsorshipNo sponsoren_US
dc.language.isoengen_US
dc.publisherSensors and Actuators A: Physicalen_US
dc.rightsinfo:eu-repo/semantics/embargoedAccessen_US
dc.subjectPermanent magneten_US
dc.subjectDouble-layer magnet designen_US
dc.subjectRotary micromachineen_US
dc.subjectMicromotoren_US
dc.subjectSpirometeren_US
dc.subjectSabit mıknatıstr_TR
dc.subjectÇift katmanlı mıknatıs tasarımıtr_TR
dc.subjectDevir mikromekaniktr_TR
dc.subjectMikromotortr_TR
dc.subjectSolunumölçertr_TR
dc.titleAn investigation on the electromagnetic design optimization of rotary micromachines with double-layer permanent magnetsen_US
dc.typeinfo:eu-repo/semantics/articleen_US
dc.relation.publicationcategoryInternational publicationen_US
dc.identifier.wosWOS:000349573400040
dc.identifier.scopus2-s2.0-85027950774
dc.identifier.volume222
dc.identifier.issue1
dc.identifier.startpage335
dc.identifier.endpage340
dc.contributor.orcid0000-0003-4591-2882 [Beyaz, Mustafa İlker]
dc.contributor.abuauthorBeyaz, Mustafa İlker
dc.contributor.yokid107317 [Beyaz, Mustafa İlker]
dc.contributor.ScopusAuthorID24343068300 [Beyaz, Mustafa İlker]
dc.identifier.doi10.1016/j.sna.2014.12.025


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster